| Detection mode |
MEAN/Ture RMS (switch) |
| DC V |
50.000/500.00/2400.0mV/5.0000/50.000/500.00/1000.0V
(Input impedance: Approx. 100MΩ [50/500/2400mV], 10MΩ [5/50/500/1000V])
±0.02%rdg±2dgt (Basic accuracy) |
| AC V [Ture RMS] |
50.000/500.00mV/5.0000/50.000/500.00/1000.0V
(Input impedance: 11MΩ<50pF [50/500mV/5V], 10MΩ<50pF [50/500/1000V])
±0.4%rdg±30dgt (Basic accuracy) |
| AC V [MEAN] |
50.000/500.00mV/ 5.0000/50.000/500.00/1000.0V
(Input impedance:11MΩ<50pF [50/500mV/5V],10MΩ<50pF [50/500/1000V])
±1%rdg±30dgt (Basic accuracy) |
| DCV+ACV |
5.0000/50.000/500.00/1000.0V
(Input impedance: 11MΩ<50pF [5V], 10MΩ<50pF [50/500/1000V])
±0.5%rdg±10dgt (Basic accuracy) |
| DC A |
500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
±0.2%rdg±5dgt (Basic accuracy) |
| AC A [Ture RMS] |
500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
±0.75%rdg±20dgt (Basic accuracy) |
| AC A [MEAN] |
500.00/5000.0µA/50.000/500.00mA/ 5.0000/10.000A
±1.5%rdg±20dgt (Basic accuracy) |
| DCA+ACA |
500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
±1%rdg±10dgt (Basic accuracy) |
| Ω |
500.00Ω/5.0000/50.000/500.00kΩ/5.0000/50.000MΩ
±0.05%rdg±2dgt (Basic accuracy) |
| LowPower-Ω |
5.000/50.00/500.0kΩ/5.000MΩ
±0.2%rdg±3dgt (Basic accuracy) |
| Continuity buzzer |
500.0Ω
(The buzzer turns on at resistances lower than 100±50Ω) |
| Diode test |
2.4000V
±1%rdg±2dgt
Open curcuit voltage: <5V (Approx. 0.5mA Measuring Current) |
| Capacitance |
5.000/50.00/500.0nF/5.000/50.00/500.0µF/5.000/50.00mF
±1%rdg±5dgt (Basic accuracy) |
| Frequency |
2.000 to 9.999/9.00 to 99.99/90.0 to 999.9Hz/0.900 to 9.999/9.00 to 99.99kHz
±0.02%rdg±1dgt (Basic accuracy) |
| DUTY |
10 to 90%
±1%rdg |
| Temperature |
-200 to 1372ºC
±1%rdg±1.5ºC
-328 to 2501.6ºF
±1%rdg±2.0ºF (with the use of K-type Temperature probe) |
| Measurement functions |
DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
Capacitor, Duty cycle ratio, Decibel (dBV, dBm), Continuity Check, Diode Test, LowPower-Ω |
| Other functions |
Data Hold (D/H), Auto Hold (A/H), Peak Hold (P/H), Range Hold (R/H), Maximum value (MAX), Minimum value (MIN)
Average value (AVG), Zero Adjustment (Capacitor, Resistance), Relative values, Save to Memory, LCD backlight |
| Applicable standards |
IEC 61010-1 CAT IV 600V / CAT III 1000V Pollution degree 2
IEC 61010-031, IEC 61326-1 (EMC) |
| Power source |
R6 (1.5V)×4
(Auto power off: approx. 20 minutes) |
| Dimension |
192(L)×90(W)×49(D) mm |
| Weight |
Approx. 570g (including batteries and blank cover) |
| Accessories |
7220A (Test leads)
8926 (Fuse [440mA/1000V])×1 (included)
8927 (Fuse [10A/1000V])×1 (included)
R6×4
Instruction manual
Blank cover |
| Optional accessories |
7234 (Alligator clip)
8241 (USB Communication set)
8115 (AC/DC Clamp Sensor)
8121 (Load current Clamp Sensor)
8122 (Load current Clamp Sensor)
8123 (Load current Clamp Sensor)
8146 (Leakage & Load current Clamp Sensor)
8147 (Leakage & Load current Clamp Sensor)
8148 (Leakage & Load current Clamp Sensor)
7146 (Banana Ø4 adjuster plug)
8405 (Temperature probe)
8406 (Temperature probe)
8407 (Temperature probe)
8408 (Temperature probe)
9154 (Carring case) |
