Precision specifications
|
AC voltage
(40 Hz to 500 Hz)1
|
Range
|
Resolution
|
Accuracy
|
6.000 V
60.00 V
600.0 V
|
0.001 V
0.01 V
0.1 V
|
1.0 % + 3
|
DC voltage
|
6.000 V
60.00 V
600.0 V
|
0.001 V
0.01 V
0.1 V
|
0.5 % + 3
|
Exchange millivolts
|
600.0 mV
|
0.1 mV
|
3.0 % + 3
|
Diode test2
|
2.000 V
|
0.001 V
|
10 %
|
Resistance
(ohm)
|
400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ
|
0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ
|
0.5 % + 3
0.5 % + 2
0.5 % + 2
0.5 % + 2
0.5 % + 2
1.5% + 3
|
Capacitor3
|
50.00 nF
500.0 nF
5.000 μF
50.00 μF
500.0 μF
1000 μF
|
0.01 nF
0.1 nF
0.001 μF
0.01 μF
0.1 μF
1 μF
|
2 % + 5
2 % + 5
5 % + 5
5 % + 5
5 % + 5
5 % + 5
|
Frequency4 Hz
(10 Hz – 100 kHz)
|
50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz
|
0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHz
|
0.1 % + 3
|
Duty cycle4
|
1 % to 99 %
|
0.10 %
|
1 % typical case5
|
AC current
(40 Hz – 200 Hz)
|
4.000 A
10.00 A
|
0.001 A
0.01 A
|
1.5 % + 3
|
DC
|
4.000 A
10.00 A
|
0.001 A
0.01 A
|
1.5 % + 3
|
-
All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified.
-
Typically, the open circuit test voltage is 2.0 V and the short circuit current is < 0.6 mA.
-
The parameters do not include errors due to test lead capacitance and capacitor substrate (up to 1.5 nF in the 50 nF range).
-
All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified.
-
Typically, the frequency is 50 Hz or 60 Hz and the duty cycle is 10% to 90%.
|
Features
|
Overload protection
|
Input impedance (nominal value)
|
Common mode rejection ratio
|
Normal mode rejection ratio
|
AC voltage
|
600 V 1
|
>10 MΩ <100 pF 2
|
>60 dB at 50 Hz or 60 Hz at DC current
|
−
|
Exchange millivolts
|
600 mV
|
>1M, <100 pF
|
>80 dB at 50 Hz or 60 Hz
|
−
|
DC voltage
|
600 V 1
|
>10 MΩ <100 pF
|
>100 dB at 50 Hz or 60 Hz at DC current
|
>60 dB at 50 Hz or 60 Hz
|
-
Up to 6 x 105 V Hz
-
For medium voltage (alternating current), the input impedance is approximately 1 MΩ.
|
General technical indicators
|
The highest voltage applied to any terminal and ground
|
600 V
|
Display (LCD)
|
6000 counts, updated three times per second
|
Type of battery
|
Two AAA batteries (NEDA 24A, IEC LR03)
|
Battery life
|
At least 200 hours
|
Temperature
|
Operating temperature
|
0 °C to 40 °C
|
Storage temperature
|
-30 °C to 60 °C
|
Relative humidity
|
Working humidity
|
No condensation below 10 °C
≤ 90 % at 10 °C to 30 °C; ≤ 75 % at 30 °C to 40 °C
|
Working humidity, 40 MΩ range
|
≤ 80 % at 10 °C to 30 °C; ≤ 70 % at 30 °C to 40 °C
|
Altitude
|
Working elevation
|
2000 m
|
Storage altitude
|
12,000 m
|
Temperature coefficient
|
0.1 X (specified accuracy) / °C (<18 °C or >28 °C)
|
Current input fuse protection
|
11A, 1000V fast-melting type, must use Fluke designated parts
|
Volume (height x width x length)
|
142 mm x 69 mm x 28 mm
|
Weight
|
200 g
|
Protection level
|
IEC 60529: IP 40
|
Safety
|
IEC 61010-1: 600 V CAT III, pollution degree 2
|
Electromagnetic environment
|
IEC 61326-1: Portable
|
Electromagnetic compatibility
|
Applicable only in Korea. Class A equipment (industrial broadcasting and communication equipment)1
|
1 This product meets the requirements of industrial (Class A) electromagnetic wave equipment, which should be noted by the seller or user. The device is suitable for use in a work environment, not a home environment.
|
