Power Quality Analyzer
|
Wiring connections
|
1P2W, 1P3W, 3P3W, 3P4W |
Measurements and parameters
|
Voltage, Current, Frequency, Active power, Reactive power, Apparent power,Active energy, Reactive energy, Apparent energy, Power factor (cos θ),
Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption, Transients/Over voltage, Inrush current, Unbalance rate),
Capacitance calculation for PF correction unit, Flicker |
Voltage (RMS)
|
|
Range
|
600.0 / 1000V |
Accuracy
|
600.0V Range : (sine wave 40 to 70Hz)
10% to 150% against 100V or more of nominal V : Nominal V±0.5%
Out of above range : ±0.2%rdg±0.2%f.s.
1000V Range : ±0.2%rdg±0.2%f.s.(sine wave 40 to 70Hz) |
Allowable input
|
1 to 120% of each range (rms). 200% of each range (peak) |
Display range
|
0.15 to 130% of each range |
Crest factor
|
3 or less |
Sampling speed of Voltage transient
|
24µs |
Current (RMS)
|
|
Range
|
8128/8135 ( 50A type ) : 5000mA / 50.00A / AUTO
8127 ( 100A type ) : 10.00 / 100.0A / AUTO
8126 ( 200A type ) : 20.00 / 200.0A / AUTO
8125 ( 500A type ) : 50.00 / 500.0A / AUTO
8124/8130 ( 1000A type ) : 100.0 / 1000A / AUTO
8146/8147/8148 ( 10A type ) : 1000mA / 10.00A / AUTO
8133 ( 3000A type ) : 300.0 / 3000A / auto |
Accuracy
|
±0.2%rdg±0.2%f.s. + accuracy of clamp sensor (sine wave, 40 to 70Hz) |
Allowable input
|
1 to 110% of each range (rms). 200% of each range (peak) |
Display range
|
0.15 to 130% of each range |
Crest factor
|
3 or less |
Active power
|
|
Accuracy |
±0.3%rdg±0.2%f.s. + accuracy of clamp sensor
(power factor 1, sine wave, 40 to 70Hz) |
Influence of power factor
|
±1.0%rdg (reading at power factor 0.5 against power factor 1) |
Frequency meter range
|
40 to 70Hz |
Power supply (AC Line)
|
AC100 to 240V / 50 to 60Hz / 7VA max |
Power supply (DC battery)
|
Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6
Battery life approx. 3h (LR6, Backlight OFF) |
Internal memory
|
FLASH memory (4MB) |
PC card interface
|
SD card (2GB) |
Communication interface
|
USB, Bluetooth® 5.0 |
Display
|
320 × 240 (RGB) Pixel, 3.5inch color TFT display |
Display update period
|
1 sec |
Applicable standards
|
IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V / CAT Ⅱ 1000V Pollution degree 2, IEC 61010-2-030, IEC 61010-031,
IEC 61326, EN 50160 IEC 61000-4-30 Class S, IEC 61000-4-15, IEC 61000-4-7 |
Temperature and humidity range
|
23±5ºC, less than 85% RH (without condensation) |
Operating temperature and humidity range
|
0 to +45ºC, less than 85% RH (without condensation) |
Storage temperature and humidity range
|
-20 to +60ºC, less than 85% RH (without condensation) |
Power supply (AC Line)
|
AC100 to 240V / 50 to 60Hz / 7VA max |
Power supply (DC battery)
|
Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6
Battery life approx. 3h (LR6, Backlight OFF) |
Dimension
|
175(L) × 120(W) × 68(D) mm |
Weight
|
Approx. 900g |
Accessories
|
7141B (Voltage test lead set)
7170(Power cord[EU]) or 7240(Power cord[UK])
7219 (USB cable)
8326-02 (SD card [2GB])
9125 (Carrying case)
Input terminal plate × 6, Quick manual, LR6× 6 |
Optional Accessories
|
8124/8125/8126/8127/8128 (Load current Clamp Sensor)
8130/8133(*)/8135(*) (Flexible clamp sensor)
8146/8147/8148 (Leakage and Load current clamp sensor)
8312 (Power supply adapter)
9132 (Magnetic carrying case) |
