Insulation resistance
|
SPD
(Varistor) |
| Test voltage |
100V |
250V |
500V |
1000V |
Max.1000V |
| Measuring ranges |
2.000/20.00/200.0MΩ
(Auto-ranging) |
20.00/200.0/
1000MΩ
(Auto-ranging) |
20.00/200.0/
2000MΩ
(Auto-ranging) |
0 to 1049V
(goes up by 1V) |
| Accuracy |
±2%rdg±6dgt
(2.000/20.00MΩ)
±5%rdg±6dgt
(200.0MΩ) |
±2%rdg±6dgt
(20.00/200.0MΩ)
±5%rdg±6dgt
(1000MΩ) |
±2%rdg±6dgt
(20.00/200.0MΩ)
±5%rdg±6dgt
(2000MΩ) |
±5%rdg±5dgt |
| Rated current |
1.0 to 1.2mA
@0.1MΩ |
1.0 to 1.2mA
@0.25MΩ |
1.0 to 1.2mA
@0.5MΩ |
1.0 to 1.2mA
@1MΩ |
‐ |
| Output short circuit current |
1.5mA max |
‐ |
Loop impedance
|
| Function |
LOOP ATT |
LOOP HIGH |
L-PE/L-N
(3wire) |
L-PE
(2wire) |
L-PE
(0.01ΩRes) |
L-PE
(0.001ΩRes)
High test current
(25A) |
L-N/L-L |
| Rated voltage |
100 to 260V
(50/60Hz) |
48 to 260V
(50/60Hz) |
48 to 260V
(50/60Hz) |
100 to 260V
(50/60Hz) |
48 to 500V
(50/60Hz) |
| Impedance range |
20.00/200.0/2000Ω
(Auto-ranging) |
20.00/200.0/2000Ω
(Auto-ranging) |
2.000Ω |
20.00Ω |
| Accuracy |
±3%rdg±6dgt |
±3%rdg±10dgt |
±3%rdg±4dgt |
±3%rdg±25mΩ |
±3%rdg±4dgt |
Nominal test current at 0Ω external
loop: Magnitude/ Duration at 230V |
L-N:6A/60ms
N-PE:10mA |
L-PE:15mA |
20Ω:
6A/20ms
200Ω:
0.5A/20ms
2000Ω:
15mA/500ms |
25A/20ms |
6A/20ms |
PSC/PFC
|
| Range |
2000A/20kA
(L-N(PSC)/L-PE(PFC)) |
2000A/20kA
(PFC) |
2000A/20kA
(PFC) |
2000A/50kA
(PFC) |
2000A/20kA
(PSC) |
| Accuracy |
PSC/PFC accuracy is derived from measured loop impedance specification and measured voltage specification |
RCD
|
| Rated voltage |
100 to 260V(50/60Hz) |
| Function |
x1/2, x1,x5,Ramp,Auto,Uc |
| 6/10/30/100/300/500/1000mA/variable |
| RCD type |
AC(G/S) |
A(G/S) |
F(G/S) |
B(G/S) |
EV |
| Trip current setting |
x1/2,
x1,Uc |
10/30/100/300/
500/1000mA(G)
10/30/100/
300/500(S) |
10/30/100/
300/500mA |
10/30/100/
300/500mA |
10/30/100/
300mA |
6mA
(x1 only) |
| x5 |
10/30/100mA |
10/30/100mA |
10/30/100mA |
10/30mA |
– |
| Ramp |
10/30/100/
300/500mA |
10/30/100/
300/500mA |
10/30/100/
300/500mA |
10/30/100/
300mA |
6mA |
| Accuracy |
Trip
current |
x1/2 |
-8 to -2% |
-10 to 0% |
-10 to 0% |
-10 to 0% |
– |
| x1 |
+2 to +8% |
0 to +10% |
0 to +10% |
0 to +10% |
0 to +10% |
| x5 |
+2 to +8% |
0 to +10% |
0 to +10% |
0 to +10% |
– |
| Ramp |
-4 to +4% |
-10 to +10% |
-10 to +10% |
-10 to +10% |
-10 to +10% |
Trip
time |
x1/2 |
2000ms(G/S):±1%rdg±2ms |
– |
| x1 |
550ms(G):±1%rdg±2ms,1000ms(S):±1%rdg±2ms |
10.5s:±1%±2㎳ |
| x5 |
410ms(G/S):±1%rdg±2ms |
– |
Continuity
|
| Range |
20.00/200.0/2000Ω (Auto-ranging) |
| Open circuit voltage(DC) |
7 to 14V |
Measuring
current |
200mA |
200mA or more(2Ω or less) |
| 15mA |
15mA±3mA(short-circuit) |
| Accuracy |
±2%rdg±8dgt |
Volts
|
| Range |
300.0/600V(Auto-ranging) |
Measuring
ranges |
Volts |
2 to 600V |
| Frequency |
45 to 65Hz |
| Accuracy |
Volts |
±2%rdg±4dgt |
| Frequency |
±0.5%rdg±2dgt |
Phase Rotation
|
| Rated voltage |
48 to 600V(45 to 65Hz) |
| Remarks |
Remarks Correct phase sequence: are displayed “1.2.3” and mark
Reversed phase sequence: are displayed “3.2.1” and mark |
Earth
|
| Range |
20.00/200.0/2000Ω(Auto-ranging) |
| Accuracy |
±2%rdg±0.08Ω(20.00Ω)
±2%rdg±3dgt(200.0/2000Ω) |
General
|
| Applicable standards |
IEC 61010-1 CAT IV 300V / CAT III 600 V Pollution degree 2
IEC 61010-2-034, IEC 61557-1,2,3,4,5,6,7,10
IEC 60529(IP40), IEC 61326(EMC) |
| Power source |
LR6 (AA) (1.5V) ×8 |
| Communication interface |
USB |
| Dimension / Weight |
136(L) × 235(W) × 114(D) mm / 1350g (including batteries) |
| Accessories |
Mains test lead※1
7281 (Test leads with remote control switch)
7246 (Distribution board test lead)
7228A (Earth resistance test leads)
8041 (Auxiliary earth spikes[2 spikes/1 set])
9084 (Soft case)
9142 (Carrying case)
9151 (Shoulder strap)
9199 (Shoulder pad)
8212-USB (USB adapter)
LR6(AA) × 8
Instruction manual
Calibration certificate |
| Optional Accessories |
8259 (Adapter for measurement terminal)
7272 (Precision measurement cord set)
8017A (Extension prod long)
8602 (EVSE ADAPETER) |
